• Made of light alloy in SR.A version

• Thrust 9 to 160 tonnes

• Stroke 40 to 220 mm

• Piston return using built-in spring

• Smooth or threaded piston with safety nut (S version)

• Anti-seizing, corrosion-proof treatment

• Guide and full load stop ring with wiper seal

• Flat, threaded and detachable piston head

• Threaded clamping holes in rear of cylinder

• Screw-on female ½ coupler 3050.3 with protective cap

The post Single-acting cylinders – light alloy spring (SR.A) appeared first on SSVH EN.

Specifications:

• Single- or double-acting models

• Stroke 50 to 285 mm

• Hollow piston with transverse cylinder diameter of 20 to 120mm

• Piston return – using built-in spring (single-acting SCR range),
– using hydraulic return (double-acting DC range)
– using load return (single-acting SC range)

• Anti-seizing, corrosion-proof treatment

• On double-acting cylinders, safety valve on reverse mode to prevent any accidental pressure surge.

• Smooth or threaded piston with safety nut (S version)

• Guide and stop ring with wiper seal

• Threaded and detachable thrust head made of treated steel

• Screw-on female ½ coupler 3050.3 with protective cap on single-acting cylinders, inverted ½ couplers 3000-3 on double-acting cylinders.

The post Hollow piston cylinders – small-diameter (SC-SCR-DC) appeared first on SSVH EN.

• Single- or double-acting models made of light alloy in SP.A, SPR.A and DP.A version

• Thrust 20 to 100 tonnes

• Stroke 30 to 435 mm

• Hollow piston with transverse cylinder diameter of 27 to 90mm

• Piston return
– using built-in spring (single-acting SPR and SPR.A range)
– using hydraulic return (double-acting DP and DP.A range)
– using load return (single-acting SP and SP.A range)

• Anti-seizing, corrosion-proof treatment

• On double-acting cylinders, safety valve on reverse mode to prevent any accidental pressure surge.

• Guide and stop ring with wiper seal

• Threaded and detachable thrust head made of treated steel

• Screw-on female ½ coupler 3050.3 with protective cap on single-acting cylinders, inverted ½ couplers 3000-3 on double-acting cylinders.

The post Large-diameter hollow piston cylinder – light alloy (SP.A-SPR.A-DP.A) appeared first on SSVH EN.

Equipped with a central hole allowing the passage of a threaded rod, tie rod or cable through the cylinder, these cylinders are used for bar tensioning, tensile tests, shaft pulling, etc. The SP.A, SPR.A and DP.A ranges are made of light alloy, their weight is optimised and their manoeuvrability greatly improved over the “steel” version.

Thrust in all positions – Capacity of 20 to 100 tonnes

The post Large-diameter hollow piston cylinders (SP-SPR-DP) appeared first on SSVH EN.

Cylinders recommended for heavy work. Double-acting, working in push and pull mode, they are equipped with hydraulic piston return (speedy operation) while retaining the benefit of the safety nut in the event of long-term load-holding. These hydraulic cylinders are equipped with a safety valve on the return to prevent accidental pressure surges.

Specifications of the double-acting DE.S cylinder

• Capacity 35 to 330 tonnes

• Stroke 100 to 220 mm

• Threaded piston with safety nut

• Hydraulic piston return

• Anti-seizing, corrosion-proof treatment

• Guide and full load stop ring

• Threaded and detachable thrust head made of treated steel

• Safety valve on reverse mode to prevent any accidental pressure surge

• Inverted screw-on ½ couplers 3000-3, for keying purposes

The post DA cylinders – hydraulic return – safety nut (DE.S) appeared first on SSVH EN.

Double-acting cylinders, intended for a wide range of applications, working in push and pull mode up to a pressure of 700 bar in both directions. Assembly can be facilitated by cylinder head threading, allowing fitting of various types of equipment (presses, punching machines, frames, etc.).

Specifications of the double-acting cylinder DE.L

• Capacity 14 to 320 tonnes

• Stroke 75 to 440 mm

• Hydraulic piston return

• Anti-seizing, corrosion-proof treatment

• Guide and full load stop ring with wiper seal

• Threaded and detachable thrust head made of treated steel

• Safety valve on reverse mode to prevent any accidental pressure surge

• Inverted screw-on ½ couplers 3000-3, for keying purposes

The post DA cylinders – Hydraulic return – smooth piston (DE.L) appeared first on SSVH EN.

• Made of light alloy in SR.A version

• Thrust 9 to 160 tonnes

• Stroke 40 to 220 mm

• Piston return using built-in spring

• Smooth or threaded piston with safety nut (S version)

• Anti-seizing, corrosion-proof treatment

• Guide and full load stop ring with wiper seal

• Flat, threaded and detachable piston head

• Threaded clamping holes in rear of cylinder

• Screw-on female ½ coupler 3050.3 with protective cap

The post SA cylinder – Piston return using built-in spring – light alloy (SR.A) appeared first on SSVH EN.

Offering ultimate versatility, the hydraulic cylinders in the SR range combine all the features of single-acting cylinders (guide and full load stop ring, return spring). They are used equally well for lifting and pushing operations and in special machines. In the S version, the threaded piston is equipped with a safety nut enabling mechanical securing of the load in position. Made of light alloy in the SR.A version, their weight is optimised and their manoeuvrability greatly improved.

The post SA cylinder – Piston return using built-in spring (SR) appeared first on SSVH EN.

Like the UB type, these single-acting cylinders are designed for lifting heavy items. Very compact, recommended for heavy work, they are used in areas with difficult access. They can be equipped with safety nuts for long-term load-holding.

Specifications of the TB cylinder with built-in spring:

• Thrust 5 to 220 tonnes

• Stroke 40 to 70 mm

• Piston return using built-in spring

• Anti-seizing, corrosion-proof treatment

• Smooth or threaded piston with safety nut (S version)

• Guide and stop ring

• Screw-on female ½ coupler 3050.3 with protective cap

The post SA cylinder – very low – Piston return using built-in spring (TB) appeared first on SSVH EN.

Made of treated steel, the ultra low cylinders in the UB.S.To range retain a high level of guidance in spite of a reduced closed height. Fully treated against seizing and corrosion, their resistance is exceptional. Their threaded piston is equipped with a safety nut enabling mechanical securing of the load in position.
They are used extensively in public works, construction and heavy industry for positioning, chocking or lifting of items requiring the use of very high tonnage cylinders.

Specifications of the SA cylinder UB.S.To type:

• Thrust 60 to 1000 tonnes

• Stroke 45 or 50 mm according to model

• Piston load return

• Anti-seizing, corrosion-proof treatment

• Stroke-limiting discharge hole

• Threaded piston with safety nut

• Tilting piston head

• Screw-on female ½ coupler 3050.3 with protective cap

The post SA cylinder – ultra-low – Load return (UB.S.To) appeared first on SSVH EN.